Friday, June 30, 2017

3 Kinds Of Reasons To Do Fire Risk Management - Business Fire Safety Training


Fire risk management is often considered the best starting point when trying to prevent fires. There are several reasons for carrying out fire risk management and some of the reasons can be categorized in the following 3 ways:

Moral

Moral considerations should be the prime reason for managing risk. Persons should not be exposed to intolerable risk while resorting to premises or in the employ of others. A moral code exists in most countries; therefore we expect employers or other responsible persons to treat the health and safety of occupiers of the premises as being of greater importance than financial profit.

Moral considerations are based on the concept of the 'Responsible Person' owing a duty of reasonable care to relevant 'Persons'. A person does not expect to risk life or serious injury as a condition of resorting to a premises or whilst in employment.

Economic/Financial

Where a business is unfortunate enough to suffer a fire, there is a very strong possibility that it may never resume. Even a small fire can cause severe disruption. Apart from the physical and costly effects of smoke and heat, fire may also cause costly and lengthy interference to services such as electrical, telecommunications, heating etc. leading to a temporary shutdown of the facility and an immediate loss in revenue.

When a business is part of a supply chain, the loss of that particular business can have a knock on effect on other businesses reliant on the supply of products, leading to a wide spread financial loss. Even if a business is brought back into operation, it is quite conceivable that customers have moved their buying power to other suppliers. Unless the down time caused by a fire is minimal, skilled staff are quite likely to move to new positions elsewhere therefore leading to a skills\shortage on re-start.

The loss of a major employer can have a detrimental financial impact on the local community. The impact on an individual will be devastating, however the knock on effect caused by the loss of the individuals spending power will also affect other local businesses and services that in turn may have to downsize or could close altogether. This can lead to an economic downward spiral plunging an area in to social deprivation. In certain circumstances, the stigma associated with a fire ravaged premises can mean that it never fully recovers even after being rebuilt. There could be a strong negative effect on revenue when prospective clients would learn about a previous fire in a care home for example.

When a building suffers from a fire, it is almost guaranteed that insurance companies will increase insurance premiums and any excess on the policy. Additional safeguards will also be expected to avoid repetition.

Social

When an establishment provides a unique or vital service, the loss of that provision can have a severe detrimental effect on the local community or in some cases a much wider area. The disruption caused to the public or service continuity when a hospital or a school is closed down for a few weeks can have severe consequences on the society's health and wellbeing, both physical and mental stress. These events can lead to a lack of confidence in the society's ability to manage itself, which would also have a negative effect on the society's economic climate if people become more reluctant to use the services provided locally and travel elsewhere to fulfill their needs.


Article Source: http://EzineArticles.com/expert/S_Davis/1012462

Article Source: http://EzineArticles.com/6481215

Tuesday, June 27, 2017

GuardDog™ Stops Fuel and Chemical Spills In Their Tracks



Independent Secondary Shutoff Control System® - Spill Prevention Technology

With the environment, life safety and product security in mind, we developed the proprietary patented GuardDog to continuously monitor from 1 to 2 sets of Overfill Detection and Static Ground units, from 1 to 8 individual product meter pulses, up to two vapor recovery hose pressure transducers, and from 1 to 8 individual preset pump commands per unit.

Under normal conditions the GuardDog is silent, until its predictive intelligence predicts valve failure within 750 msec of a wet probe event. Upon the predicted valve failure, it immediately leaps into action to shutdown pumps, close storage tank base valves and lock out the loading operation. It alerts management personnel of the problem and provides an opportunity for investigation. The GuardDog gives management control by not allowing loading to continue or resume until management determines that it is safe to load again by initiating a keyed system reset switch.

Not only does the GuardDog stop potential spills in their tracks, but it also sniffs out potential leaks, prevents over pressurization of cargo tank and attempted sabotage and product theft. It prevents catastrophic events while maximizing performance and minimizing false positives. The GuardDog gives management significant improvement in facility safety, security and control.

See more about this product at http://www.sgtinc.com/guarddog.html

Saturday, June 24, 2017

Fine Dust Explosion - Lycopodium Powder



Steve Spangler gives you slow-motion look at creating a ball of fire using lycopodium powder. This shows the dangers of a fine dust explosion.

Wednesday, June 21, 2017

Fike's DuraQuench - Versatile, Affordable Water Mist Fire Suppression



Fike’s DuraQuench pumped water mist system brings the benefits of water mist fire suppression within reach of most budgets and over the widest possible range of applications.

Sunday, June 18, 2017

Industrial Automation - Help your Robotic Project Succeed


Investing in robotic equipment can be a big leap for a small business. Industrial robots have been automating tasks since 1961. The first industrial robot, the Unimate, worked with the die casting machines at a General Motors plant. In the last decade there has been a surge of robots being integrated into mid-sized and smaller companies. One reason is the growth and affordability of the used robot market. With the leaps made in controls technology, companies are upgrading robots before the current model has finished its life-span. However, the overall functionality of the six-axis articulated arm has not changed in the last decade. As companies consolidate and reorganize, the factory surplus is sold.

Automation benefits include saving money and reducing production time. Automation also leads to an increase in part quality and reliability. These are some tips to help you get started implementing automation onto your factory floor.
  1. Involve the Shop Floor Workers Consulting the workers that currently produce the part is a good starting point. This is the person who has the experience to know what works and what had not worked in the past. They often have helpful insight into the process that you can not gain by simply watching. Requesting their participation in the robotic welding project will help it be more successful. The workers who manually perform the process can provide advice on the configuration and specifications of the equipment up front, avoiding the possibility that the equipment is not as ergonomically friendly or productive as it could be. Failure to involve them disregards the insight they have gained though experience with the process.
  2.   Choose your Robot Operators and Robotic Programmers Carefully Most industrial robots are controlled by the use of teach pendants. Several of these pendants now are programmed with an interface that resembles a personal computer. An individual that is computer-literate will have less trouble learning how to instruct the robot and moving it to accomplish the desired tasks such as welding or material handling. For instance, the challenge of transforming a manual welding process to a robotic welding process is best handled by someone with a solid background in manual welding. This would be an ideal person to select for programming or operating the robotic welder. When choosing robot operators, programmers, and technicians, special consideration should be given to motivated employees that are willing to learn and advance their skills.
  3. Make Training a Priority It is important when purchasing a robot integrator to choose one that provides training on the robotic system. This allows your company to be able to fully utilize the robot and minimize later down-time due to mechanical problems. Ideally the person chosen to receive the training should be the future programmer or operator. With the proper training, the programmer should be able to reliably produce efficient and effective robot programs. Basic groundwork training is a minimum, with the real learning happening on the shop floor. Generally your robotic integrator will program your robotic system to interact with your current equipment and leave you with a turnkey solution that requires only a push of a button. It is still ideal to have trained personnel on hand should a future problem arise. Routine maintenance, such as an annual grease replenishment and battery replacement, is also an issue that you will want a trained individual to perform. Many robotic systems have been destroyed by well-meaning maintenance by individuals that do not understand the complex nature of the robotic system.
  4. Watch Part Fit-Up and Repeatability The most problematical issue with welding robots is part quality. Robotic systems are designed to repeat the same sequence of events. If the robot system has been damaged, repeatability can become an issue. Robotics systems sold feature a repeatability measurement and that should be taken into account along with payload and reach requirements. Used robots should be tested for accuracy and repeatability during the reconditioning process. When performing properly, robotic systems are more reliable and produce parts far superior in quality than manually welded parts. Touch sensing and seam tracking can be used to compensate for weld joints that are not static, but robots are limited by the laws of physics. The use of quality equipment in conjunction with robots improves the part fit-up. Attention should be paid to lasers, welding and cutting torches, welding power supplies, raw consumables, and other variables that could lead to a loss of quality in the finished product.
  5. Calculate Estimated ROI There has been a steady growth in the robot industry over the past decade. Experts predict that this growth trend will continue in future years. Welding robots are still the majority of the market, but many applications can be handled by robots. The general rule-of-thumb is that a robotic welder can do the work of four manual welders. Therefore when production is increasing, the choice to add robotic welders is easily justified. It will also improve efficiency, productivity, and part quality. Higher quality leads to a greater demand for your product. Improved efficiency will enable you to be more competitive in your market. The improved productivity will allow you to meet your production demands without a larger workforce.


Article Source: http://EzineArticles.com/?expert=Christi_Hart

Article Source: http://EzineArticles.com/303864

Thursday, June 15, 2017

Frontline Environmental - Our Vision


Since the founding of our company, our vision has been to form long lasting ongoing business relationships with customers by providing the highest degree of value and professionalism in the services we offer. Our vision is to provide our client a single source for specialized engineering and technical services that deliver innovative solutions, real value, expertise and continuity to their project or operation.

Monday, June 12, 2017

Dust Extraction Systems Are Required In The Work Place


Dust extraction safety codes are strictly enforced in every industry. Work area dust extraction systems remove macro and micro sized particles from the air keeping workers safe from work area hazards. Workplace safety is a high priority and a workplace that does not meet health and safety regulations can receive a heavy fine. An effective air cleaning system is an important component of any fabricating or manufacturing plant.

Dust must first be confined before it can be removed and disposed. The vacuum unit draws material towards the intake in the capture hood which is designed for particle containment. The particles are prevented from entering the workspace atmosphere and the particles collect in the removal system disposal unit for safe disposal. The system air flow must be maintained at a constant velocity in order to keep the machine from clogging with dirt.

Dust extraction machines capture, convey, and collect particulate from the air for safe disposal. The particulate is trapped by a capture hood and then conveyed through a series of ducts. The soot is then collected through a pass through filter or the fume extraction arms.

Dust related illness is a major concern because dirty air can lead to such devastating illnesses such as mesothelioma, silicosis, and asbestos lung cancer. Dirty air in the work place can lead to poor skin conditions, eye and nose damage, emphysema, and asthma, if the air is not constantly filtered. Employers are now required to make the workplace a healthy area for their employees meaning that employers must install proper air cleaning devices. Business owners will receive code violation fines if their work place does not have a proper air safety system in place.

Employers must install an exhaust ventilator to clean dirty air from the site the dirt is generated along with a dilution ventilator. Employees working in high dirt areas are required to wear dirt masks with respirators which are more effective than so called nuisance dirt masks. In order to protect skin from constant contact with soot employees must wear protective clothing.

Employees are required to have regular medical checkups in order to identify and signs of soot related illness. An employee that can show that his respiratory or skin illness is a result of employer negligence can file a work compensation claim and receive damages. The safety codes are strictly enforced in order to keep workers healthy and to limit work compensation claims.

Many people do not realize that soot can be explosive depending on the elements in the soot. Soot in a flour plant can gather in the air and become combustible. If a flame is introduced into the cloud of flour soot an explosion can occur which is another reason why soot extractors are so vital in the workplace.

Employers are required to install dust extraction systems in their workplace in order to keep workers free from soot related illnesses. Particulate can enter the airways and cause a number of health disorders such as asthma, emphysema, and even lung cancer. The dangers associated with soot, fumes, and other particulate must be taken seriously which is why companies that do not meet safety code requirements can expect heavy fines. This is why it is important to have the proper dust extraction equipment.


Article Source: http://EzineArticles.com/expert/Adriana_N./479208

Article Source: http://EzineArticles.com/6081719

Friday, June 9, 2017

Data Monitoring Systems - How SCADA Systems Help in Improving Organizational Efficiency?


The world over there has been increasing awareness about the wonders that data monitoring systems can do to improve organization efficiency. Some of the businesses which use these systems include traffic signals, mass transit systems, environmental control systems, water management systems, and electric power utilities. These systems generally speaking consist of several components such as the controls, the user interface, the software that makes up the system, the network to which it is connected and the communications equipment that is used, among others. The central core of the system monitors information or data that is generated at different points.

Typically the user-interface in data monitoring systems is extremely user-friendly. The interface is the place where the data that is processed can be viewed by a human operative. This interface generally consists of controls which allow the individuals to deal with the system. SCADA systems are among the most used of all data monitoring systems, since they incorporate some of the best technology that is available for improving efficiency and productivity in several businesses. The whole system consists of a network of computers, all of which are connected to a central command, where all the information is gathered and finally processed.

The system works by getting inputs from a variety of sensors that can be placed around a warehouse, factory or for that matter any kind of workplace. The sensors job is to gather information and then send it to a centralized computer system. A variety of industries these days use SCADA. One of the biggest advantages with the system is that they help process the data accurately and completely eliminate any chance of human error. Another reason why SCADA is assuming popularity is because the system is easy to install. The system also works efficiently with very little intervention and is even capable of changing small aspects of a procedure to aid smooth flow of the operations.

Data monitoring systems have become almost imperative to the success of a variety of businesses these days. SCADA systems for instance, with the variety of advantages that they offer can ensures improved productivity and completely eliminate the possibility of human error.


Article Source: http://EzineArticles.com/?expert=Ryan_Sarver

Article Source: http://EzineArticles.com/5689720

Tuesday, June 6, 2017

Dust Collection Equipment Allows for Efficient Functioning of Your Plant


Presence of dust at an industrial facility can be extremely dangerous for not only carrying out the different operations but at the same time can also have adverse affect on the health of the persons working there. There are great many hazards associated with combustible dust, which cannot be overlooked. To overcome this situation, there are industrial dust collection equipments designed to keep your factory environment free from dust and fumes. Apart from this, a properly designed dust collection system can greatly contribute in the efficient functioning and sustainability of your plant.

Ergonomic design helps achieve environmental compliance: The equipment can be friendly in multiple of ways. In most cases, it is made up of environmentally friendly components and materials. The machine comes equipped with life-long filters and features a system that allows for recirculation of the air throughout the plant.

Properly Sized Dust Collector: The dust collector must be properly to run efficiently at the requisite airflow. If the collector is undersized, a number of problems can come into existence like rapid dropping of the operating pressure, overloading of the filters & as such frequent change out, maintenance problems and such. If any of this occurs than the operating expenditure and energy usage increases.

High pressure rating collector: Vessel strength is an important factor in the determining of explosion-protection technology and what should be the size of the equipment. A heavy-duty collector, made of thick-gauge metal and with high pressure rating, might enable you to use simple and less costly explosion-protection systems that comply with NFPA standards. Such collectors are known to survive a combustible dust explosion.

Reliable filters minimize change out frequency: No matter how high quality the equipment is, sooner or later it needs repair and servicing. Extended-life cartridge filters reduce the number of frequency required for change out. This minimizes the exposure of employees to dust saves on maintenance and disposal costs & reduces landfill impact. Many filters have media packed so tightly into the cartridge that most it are not available for filtering.

The new open-pleat design of collectors allows for optimum utilization of the media and even improves the airflow through the filter. The improved design help reduce pressure drop and at the same time allows for energy saving.

Variable frequency drive to control fan speed: There is a common misconception that a mechanical fan damper reduces collectors energy consumption. However, this is not true the variable frequency drive (VFD) controls fan speed rather more effectively. The electrical control is highly efficient in maintaining the desired airflow through the collector. The VFD not only helps reduce the utility rate but as well as the overall energy consumption.

Premium efficiency fans for additional energy savings: Wastage of energy from industrial electric motors is a common problem. The premium quality efficiency fan motors are designed to improve the energy performance of the equipment. Many electric utilities offer rebates and perks that can add extra to the savings.

Such features of dust collection equipment not only provides a clean and healthy environment for the employees but at the same time boost the productivity of your plant by manifolds.


Article Source: http://EzineArticles.com/expert/Jennifer_D_Mitchell/1694070

Article Source: http://EzineArticles.com/7988479

Saturday, June 3, 2017

The Differences Between Software Development and Software Engineering


Software development and software engineering go hand in hand when it comes to the implementation of software. Software development deals more with the creation of the software and when this is complete, software engineering takes over with the creation of software systems. Both of these disciplines are at times interchangeable and without much difference to the layman. If you just want to have one specific piece of software designed, such as database software that will keep track of your bird watching hobby, then you'll just need software development. If, however, you want your bird watching database to be able to support multiple functions, such as delivering a report with statistics and results, then you'll more likely need the expertise of software engineering.

Software engineers will implement and design software applications through the use of many mediums. These software applications will then be used for a variety of purposes that include business practices to entertainment purposes. It is these software applications that allow users to make their time on the computer as functional and productive as possible. Types of software applications include language applications, office applications, entertainment packages, and applications for education.

The cost of hiring a software developer will be significantly less than hiring a software engineer. Before you make your final decision about what you want the software to do you need to plan you budget, your timeline, and determine what you want the end result to be. The industry of software development continues to grow each year as more and more businesses are having their own software developed for them that is specific to what they do and what they want the software to do. Most companies will already be using some type of software application, such as Office Suite, and most likely won't need another application developed for them. For most intents and purposes you'll be fine hiring a software developer for you and your business needs.


Article Source: http://EzineArticles.com/?expert=James_Hunt

Article Source: http://EzineArticles.com/117500