Wednesday, January 25, 2017

The Most Effective Industrial Dust Collection Systems


Industrial dust collection equipment is used as a form of industrial air cleaning. Most industrial dust collection systems are used in manufacturing workplaces to process large amounts of air and remove fine particles. Without effective industrial dust collection systems, airborne particles could collect in the workplace air and affect employee health as well as doing damage to the correct functioning of equipment.

There are several types of industrial dust collection systems, each with unique methods of removing dust from the air. It's difficult to pinpoint which industrial dust collection system is most effective, but read on below for the basics of each type.

Electrostatic precipitators are industrial dust collection gear that use electrostatic charges to separate dust from the incoming stream of air. The dusty air is "vacuumed" into the system, passed through the pre-filter and through the negative and positive electrodes, which in turn cause the particles to attach to the positively charged grounded electrode, or collection plate. Once the particles have been removed, the clean air passes through a second air filter and back into the room.

Media filtration industrial collection methods are used to filter dust from the incoming air stream by using a screening material or fabric. When the fabric is placed in the path of the air stream, the dust particles are trapped in the fabric, creating a "dust cake." When the dust cake increases, it actually becomes a more effective collection tool by trapping more and more particles from the incoming air.

Cyclone industrial collection systems are large central funnels attached to workplace ducts. Any airborne dust and debris is sucked into the ductwork and transported to the cyclone dust system, and then passed into a high-speed cyclone funnel to separate particles from clean air. Once the separation is complete, the particulate matter is collected in a container, while the smaller dust particles are expelled through an outside vent.

Air washers, also called wet scrubbers, are mostly used as a way to control potential dust fires or explosion risk. The air washer industrial collection method uses water to absorb fine dust particles and then removes the particles in a fine mist which is collected for removal in a clarification tank where the dust settles to the bottom.

Industrial dust collection systems are available in a variety of designs to manage the different types of workplace dust issues. Since dust can remain permanently in lung tissue and has the potential to cause workplace fires and explosions, managing dust properly is the best way to prevent health and safety problems in industrial settings. As you can see, properly chosen industrial dust collection systems are a vital part of most any industry.


Article Source: http://EzineArticles.com/expert/Thomas_J_Scott/748367

Article Source: http://EzineArticles.com/6387803

No comments:

Post a Comment