Tuesday, December 30, 2014

Types of Projects Completed by Frontline Environmental

Types of Projects Completed by Frontline Environmental Include the Following:


• Refinery Retrofits - Gasoline, LPG, Asphalt

• Truck, Rail & Marine Loading Facilities

• AST / UST Automated Tank Gauging Systems

• General Manufacturing & Packaging Facilities

• Food Processing & Manufacturing Operations

• Bulk Material Handling Facilities

• Fuel Analysis Systems

• Back-up Fuel Supply Projects

• Facility Access & Control Projects

• Local & Remote Communications Systems

• Ground Water / Soil Remediation Projects

• Water Analysis & Control Systems

• Waste-water Projects

• Pipeline Leak Detection Projects

Saturday, December 27, 2014

Choose The Right Calibration Services For Maintaining The Performance Of Gadgets

The intense increase in the use of various electronic gadgets has simplified the way of life of people. There are so many tasks which are performed with the help of various gadgets. This has greatly reduced the manual efforts and incorporated an element of modernization. Various gadgets have found application in different households, industries and factories. The use of various modern devices has made it possible for individuals and establishments to get several benefits. However, it is extremely important for people to ensure that the gadgets they use are at par with certain standards. A gadget which is performing below a standard is not considered to be very suitable.

One very important thing which gadget users should keep in mind is about calibration. There are a number of experts who provide these services. Calibration services are basically the methods of evaluating and adjusting the values of a gadget for its precision and accuracy. Such a thing is done by comparing the gadget with another gadget which has an accurate and unvarying standard. These services are capable of checking, determining and correcting all the gadgets that use quantitative measurements. Many individuals and establishments rely greatly on these services. The method of calibration cannot accept any kind of faulty and shortcut processes. These services include validation, repair, preventive maintenance and electronic asset management.

Many laboratories, hospitals, measuring device manufacturers, aviation and testing industries, engineering institutions and processing plants undergo calibration. In order to ease the process, calibration instruments can be used. The use of these instruments brings a number of benefits. It can greatly benefit the manufacturers and consumers. Manufacturers can greatly increase their level of productivity, get a smooth flow of work and reduces wastage. The consumers will get the advantage of using high quality products. The business organization as a whole tends to become very credible by using these instruments. wastage Their brand becomes popular throughout and is promoted positively. The instruments should definitely be calibrated in these establishments so that the standards are maintained and the progress of the establishment is ensured.

Organizations should make all possible efforts to avail these services from a reliable source. If a reliable and expert service provider is approached for carrying out the process of calibration, the establishments can get several benefits. These service providers use sophisticated instruments for the process. They are capable of giving the accurate results. Proper actions can then be taken by the establishment. These services can be adopted at extremely reasonable costs. There is no need to spend huge sums of money in getting the instruments calibrated. The reliable services would ensure cost effectiveness to the establishments. It proves very profitable for the organization, individuals and households to a great extent.

Author define the calibration services usage for better maintenance of gadgets Performance, has years of experience in testing and measuring tools. Through this article he shares some valuable information on calibration instruments among all reader here.
Article Source: http://EzineArticles.com/?expert=Joseph_Aditya

Article Source: http://EzineArticles.com/8023502

Wednesday, December 24, 2014

Sunday, December 21, 2014

What You Need to Know About Automation Control Device

Technological advancement has made it possible for us to automate almost everything nowadays. You can get an automation control device from a reputable manufacturer that can help you to automate your home or factory. This helps to improve efficiency and also security. The devices work by use of AC drives. These drives regulate the supply of electricity to a specially designed motor system or electrical device. The automation can control anything you choose such as lighting, doors, sprinkler system among others. With push button switches, you can control these automated functions from wherever you are. You can get an LCD control system so that the user interface is centralized and also simple to understand and operate. There are also other interfaces available in the market such as designated control keypads. These have inbuilt temperature sensors so that they can detect your input.

You can also have programmable controllers. These allow for commands to be input beforehand. For instance, the garden sprinkler can be set to go on at a certain time in the day. The same goes for security lighting. This automation control device can be installed so that it can give you control over your house even when you are not home. The AC drives are controlled by the device to act at specified times so that the action specified is carried. These controllers can also be customized according to your needs. The numbers of modules you get depend on your budget as well as needs. The more modules you get, the more the device costs you and vice versa. It is however more beneficial if you have one centralized automation system rather than different small systems. This is because in case of a break down, the problem can easily be identified and repaired. It also helps in lowering the installation, maintenance and repair costs.

Control systems automation ensures you take control of your operations. In a factory setting, having the ability to stop the processes in case of an emergency is necessary. It brings about a feeling of safety. Having an automation control device installed in a factory can help coordinate the operations. The AC drives can be attached to various processes in the factory so that they can be switched on and off at the control office. In case of an emergency such as an accident on site that could hamper the operations of the firm, the switch can be turned off so that the machines stop. It should be able to override the switching of the machines on the factory floor. This could be useful in case there is an act of sabotage. Some of the processes that can be automated include packaging, blending, mixing, batching as well as the movement of the conveyor belt.

There are many companies that can provide an automation control device out there. There also many that can do maintenance and repair of the AC drives that make the automation work. However, you should only choose companies that have experience in the field such as industrial control direct to do your installation, maintenance and repair. In this way, you can be sure you are getting professional services.

Joshua Donaldson is the author of this article on Industrial Control Direct.
Find more information, about Products Offered here

Article Source: http://EzineArticles.com/?expert=Joshua_Tyler_Donaldson

Article Source: http://EzineArticles.com/7880813

Thursday, December 18, 2014

3 Differences Between a Feasibility Study and a Business Plan

There seems to be a mix up between a feasibility report and a business blueprint or plan. While some say they are the same, others argue they are not. So I want to use this medium to draw a line between a feasibility study and a business plan.

Though the process involved in developing feasibility report and a business plan are similar, I will reveal to you some basic differences:

1) Feasibility is carried out with the aim of finding out the workability and profitability of a business venture. Before anything is invested in a new business venture, a feasibility study is carried out to know if the business venture is worth the time, effort and resources.

On the other hand, a biz plan is developed only after it has been established that a business opportunity exist. This simply means that a biz plan is prepared after a feasibility study has been conducted.

2) A feasibility report is filled with calculations, analysis and estimated projections while a business blueprint or plan is made up of mostly tactics and strategies to be implemented in other to grow the business.

3) Feasibility is all about business idea viability while a business plan deals with business growth and sustainability.

I hope this few words I have written has been able to point out the key differences between a feasibility study and a business blueprint or plan. I feel it's also worthwhile to know that a feasibility report or study can readily be converted to a business plan.

And just before I drop my pen, if you really want to learn How to Start a Business from scratch; please feel free to visit our blog. In addition, you can also get quality information on How to Become a Billionaire in less than 10 years
Article Source: http://EzineArticles.com/?expert=Ajaero_Tony_Martins_Ifeanyi

Article Source: http://EzineArticles.com/3223461

Monday, December 15, 2014

Industrial Automation Technology

Industrial Automation Technology refers to the control of industrial machinery and its various processes thus reducing the need for human intervention. Industrial automation technology makes use of various control systems such as programmable logic control, industrial control and numerical control systems. These applications are usually used in concert with information technology systems such as computer technologies that control the automated machinery.

Automation is a step up from mechanization because it greatly reduces the human mental and sensory requirements, whereas mechanization assists human operators with the muscular requirements for the work.

Industrial automation plays a large part in the global economy, and engineers work hard to combine mathematical tools with automated devices to produce better and more complex systems for the expanding applications and range of human activities.

The automation of machines and other technologies has a big impact on a wide range of industries, for example; telephone operators have been mostly replaced by automated switchboards and answering machines, and automated teller machines now make money transactions much easier and help cut down visits to the bank.

Industrial automation is used in a wide range of industries for many different types of application and some of these can include:

o Mechanical engineering

o Industrial controls

o Electronic engineering

o Integrated circuit design
 
o Motion control and fluid control

o Data acquisition software

There are many advantages and disadvantages in the scope of industrialization and some of these advantages are:

o Economy improvement

o Can be used to carry out dangerous tasks

o Can replace tedious human tasks

Some of the main disadvantages are:

o Automation has its limits and at present is unable to replace all human tasks

o Development costs can be unpredictable

o Initial set-up costs are usually high

It is thought by some critics that automation will lead to higher unemployment, yet others argue that the opposite is true and that automation has led to higher employment.

If you are in need of this service check out our product pages, they contain many companies that specialise in this. John Cheesman writes about Industrial Automation Technology. Visit the Businessmagnet product page for details and suppliers of Industrial Automation Technology.
Article Source: http://EzineArticles.com/?expert=John_Cheesman

Article Source: http://EzineArticles.com/3734789

Friday, December 12, 2014

CAD Engineering

CAD engineering is widely used to design and develop products to be used by end consumers or intermediate goods used in other products. CAD is used extensively in engineering process, right from the product conceptualization stage spanning across most stages of the manufacturing process.

CAD is used in almost all engineering based industries like architecture, automotive, consumer, electronic, electrical, machinery, ship building, aerospace, aircraft and construction, to mention only a few. Architects use CAD to design buildings while using the software package to enable drawings and designs. CAD enables civil engineers and architects in a variety of ways like aiding them in architectural, electrical, structural, and interior designs, to mention only a few.

Engineering industries, especially mechanical engineering based companies, use CAD in a variety of ways. Right from creating engineering drawings to 3D modeling, CAD is used in most of the manufacturing process. 3D modeling and pro-engineering packages allow engineering companies to design products or components for machinery, taking care of even the minutest of details. The entire process saves time and money and ensures precision and accuracy. With increasing sophistication in many industries, the design concepts done using CAD are directly fed into the manufacturing process using Computer Aided Manufacturing (CAM) systems. Electrical and electronic engineering industries use CAD for things like PCB designs and wiring layout designs. CAD is also used to design the overall layout of a manufacturing unit.

It wouldn't be far fetched if one were to say that CAD has revolutionized the entire engineering process. CAD engineering enables quicker product turn around times, as a result of which we see more and more new products hitting the market everyday. CAD engineering is responsible for the advent of robotics into the manufacturing sector, with more and more engineering processes being automated for increased accuracy and production.

CAD [http://www.CAD-ontheweb.com] provides detailed information on CAD, CAD School, CAD Software, CAD Drawings and more. CAD is affiliated with Digital Architectural Rendering [http://www.WetPluto.com/3D-Architectural-Rendering.html].
Article Source: http://EzineArticles.com/?expert=Jason_Gluckman

Article Source: http://EzineArticles.com/408176

Tuesday, December 9, 2014

Solving The Problem Of Electric Metering For Multi-Unit Buildings



Quadlogic has provided electric submetering systems for residential and commercial customers for 25 years. Our patented Power Line Communications technology is what sets us apart. By utilizing a building's existing power lines to transmit metered data, no additional wiring or meter readers are required. Leading electrical contractors, property owners and property managers depend on the accuracy and reliability of our equipment. Our meters are also capable of receiving pulse data from water, gas and BTU meters for a complete utility metering solution.

At Frontline Environmental Technologies, we have a wide variety of solutions for many business needs. See more at http://www.FrontlineWorldwide.com

Saturday, December 6, 2014

Feasibility Study Components

A feasibility study is created in order to minimize risk and to ascertain the viability of a project. As soon as it is certain that a specific project could be carried out profitably, it is only then, that it could be implemented. It is not merely an investigation but at the same time a plan or a framework on how the operation of a business project shall be accomplished.

A feasibility study contains five major components namely: marketing study, technical study, management study, financial study and social desirability.

During marketing study, the researcher must determine if there are sufficient demands for the product as well the competitive position of the firm in the industry. Sale projection for the project must also investigate as part of market study.

The manufacturing process, plant size, production schedule, machinery, plant location and layout, structure, raw materials, utilities and waste disposal is taken into consideration when it comes to technical study.

Management study involves on how the project shall be managed such as the business organization including the organization chart and function of each unit management personnel, skills and numbers of labor required.

In financial study, the researcher should include the assessment of total capital requirements, break-even outputs, sales and prices, amount of sales required to earn a certain amount of profit and the cash payback period.

Last but not the least is the social desirability which is measure by economic benefits to the people living in the community and its vicinities.

No wonder that one of the important steps in business development is a feasibility study. Feasibility study is used to determine the potential for success of a proposed business venture. The success of a feasibility study is based on the careful identification and evaluation of all of the important aspects for business success.

Click here for Feasibility study samples
Article Source: http://EzineArticles.com/?expert=Charise_Mendoza

Article Source: http://EzineArticles.com/2011460

Wednesday, December 3, 2014

Automation Systems Are the Center of Manufacturing

When you hear or see the words "automation systems" you can think of a lot of different types of systems. You could visualize home automation systems, application automation systems, or any other of a bunch of systems. The type of automation systems about which we are thinking is the one that keeps your manufacturing running the way that it should. Just like any of those other systems that you might have thought of when you saw the title of this article, this automation system has a computer that sits in the middle of several other devices. This central computer is usually called a controller, probably because it controls all the other parts of the system that are connected to it. This controller has everything going for it in the way of power and speed. It is always built on a very rugged foundation so that it can handle the rugged environment in which it may be required to operate. It can operate in extreme temperatures without interruption.

The controller can be configured using the end-user requirements as a guide. The processor, which is the heart of the controller, has a clock rate that is extremely fast. All this means is the speed at which instructions are read and executed by the processor are blindingly fast. The faster the clock rate of the processor that is in the controller the more instructions the controller can send and receive from automation devices at a very high rate of speed. The processor has an operating system running in it at all times. The processor and the operating system support one or more programming languages, with which programs are written to control and give instruction to the automation. The processor is where the programs are executed that are used to instruct the other automation devices of the system. Programs that the processor can execute will be able to perform math calculations and conditional and Boolean logic. The controller will create an event log that acts as a chronological historical record of all occurrences that happen while the controller is running. This is invaluable when troubleshooting system problems.

Maintaining control of the automation environment is the main function of the controller. It will send and receive information from the system to determine how it should make decisions about controlling the system. The controller has the optional ability to have multiple local control and remote control points for communicating with automation devices. There are usually several counters, math variables, logic variables, and timers to assist in the direction of automation devices while they do the work.

All the automation devices that work in the manufacturing environment to make products are connected to the controller by wireless or high-speed cabling. You can see why the processor has to be fast, if it is to give instructions to devices in advance of when they are required to accomplish automation tasks. One of the devices to which thee controller is connected is a monitor or display. This device will be able to display measured values, error codes from the system, calculated values, the statuses from other devices that are connected to the system, and system configuration settings.

Usually all the devices that are connected to the controller via a serial or TCP connection. Sometimes this main computer not only acts as a controller for automation, but it also has the role of the server for an intranet system in the business. This means the computer will be running automation-controlling software while also running ERP software, accounting applications and other business applications. This can make it easy for the business management software to be made aware of the production rates, inventory levels due to manufacturing, and accounting information that is necessary to run the business. The controller is also asked to monitor data from analog sources like temperatures and tank pressures. The system has the ability to interface with outside systems for data exchange. The ease of transmission of data in and out of the company system and to and from outside sources come from the standardization of protocols that have been established. Data is readily exchanged with resource planning software, equipment effectiveness software, and supply chain management software.

The system that requires a controller for keeping its processing optimized in manufacturing is much more than a personal computer. It is the middle of a very powerful system that has the ability to control the most important part of a manufacturing operation. The automation it controls is what is required to keep the business viable.

John Mitchell is President of Provision, Inc, an online publisher of information about the application of automation in business. Mitchell has years of experience in the management of manufacturing, warehousing, and transportation. The company website, http://www.provinc.net, assists companies in the evaluation of the benefits and capabilities of production automation. Thoughts on how to select the most effective automation for your business are presented. Insights into the use of vision systems, RFID and other topics in automation are covered. Requests for quotations and questions about automation can be submitted to the consulting engineers of leading automation companies.
Article Source: http://EzineArticles.com/?expert=John_F_Mitchell,_Jr

Article Source: http://EzineArticles.com/6405514